For Sales / Support Call / Email:
+91 20 26930908 / 26930960 / 61 Sales@steamequipments.com
Sampling System Solutions
Analytical Division
pH Analyzer
Conductivity Analyzers
Dissolved Oxygen Analyzer
Chlorine Analyzers
TOC Analyzer
Silica Analyzer
Iron Analyzer
Oil in Water Analyzers
Hydrazine Analyzer
Hardness Analyzer
Chloride Analyzer
Phosphate Analyzer (Yellow Method)
Phosphate Analyzer (Blue Method)
Dissolved Zinc Analyzer
Sulphate Analyzer
Aluminum Analyzer
Cyanide Analyzer
Manganese Analyzer
Nitrite Analyzer
Sodium Analyzer
Alkalinity Analyzer
Ion Selective Analyzer
Sulfide Analyzer
COD-BOD-TSS Analyzers
Turbidity Analyzer
Optical DO Analyzer
Sequencer
Environmental Solutions
Steam Engineering
Zirconium Oxide Oxygen Analyzer
Optimizing combustion efficiency and minimizing exhaust emissions are important for proper operation of nearly every industrial process that burns fuel. From cleaning burning natural gas to dirty coal fired kilns, the model 9060 provides reliable and efficient O2 monitoring capabilities by combining field proven zirconium oxide sensor technology with a powerful and versatile microprocessor based controller.
Calibration/Self Diagnostics
This analyzer provides standard programmable automatic calibration and auto-purge outputs. The user can program the cal/purge sequence to an alarm relay for external indication. It has also been designed with a probe diagnostic loop to continuously monitor for probe impedance to ensure the sensor is functioning properly. The electronics self-calibrate all inputs every minute.
Interface
The 9060 provides two isolated 4-20mADC linearized control signal outputs. One is dedicated to the O2 signal and the other is user selectable from thirteen other variables. In addition, an RS-232/ RS-485 printer/ computer interface capability is provided. One general diagnostic alarm and three field selectable alarms with switching are provided standard with this unit.
Setup
The analyzer’s functions and adjustments are easily accessed via a membrane keyboard. By using the prompting keys and following the display codes from the 2 line alphanumeric LCD screen, the user can easily interface with and set up the 9060 for field operation
Control Unit
The 9060 provides in-situ analysis capability which can accept signals from up to two zirconia probes for averaging or back up purposes in furnaces, kilns and boilers with the sample temperature ranging form ambient up to 1400°C. This unit is provided within a compact, steel, IP-54 (IP-65 without internal air reference pump), easily installed, gasketed enclosure suitable for wall mounting. Purged or explosion proof design enclosures rated for hazardous areas can also be supplied.
Reference Pump
An integral automatic reference pump is provided as standard with this unit. This pump draws atmospheric air and delivers it to the zirconium sensor as reference air in lieu of customer supplied instrument air. If the operator desires, the pump can be bypassed and instrument air, at a flow of 50 cc/min, can be delivered to the delivered to the sensor as required sensor as required.
Ranges
0.01 ppm to 100% automatically defaults to exponential format below 0.01 ppm, ppm reading up to 10,000 ppm, and percent above that
Inputs/Outputs
Inputs:
One or two zirconia oxygen probes or sensors
One zirconia sensor & auxiliary thermocouple type J, K, R or S
Burner “On” signal (dry contact)
Purge air flow switch
Outputs:
Four programmable alarm relays
Two isolated 4-20 mA or 0-20 mA
SSR outputs to purge & calibration check gas solenoid valves
Settable parameters
Alarms
Normally open failsafe, 2A/240 VDC and 30 VDC
Common alarm relay with 20 user selectable instrument alarm functions
Three programmable process alarm relays
Accuracy
± 1% of the actual oxygen reading
Repeatability
± 0.5% of the actual oxygen reading
Temperature
-13° to 131°F (-25° to 55°C)
5-95% RH (non-condensing)
Power
85-265 VAC, 50/60 Hz, 5W
Dimensions
10.24″W x 6.30″H x 3.54″D
(26 x 16 x 9 cm)
© 2020. Steam Equipments Pvt Ltd. All Rights Reserved.