For Sales / Support Call / Email:

+91 20 26930908 / 26930960 / 61 Sales@steamequipments.com

Moisture Separator

Moisture Separator

Removal of Moisture becomes essential from gases and Steam as it cause of two phase flow, water hammer, damage to equipment, as well as it affects heat transfer, total heat carrying capacity of the fluid in case of steam.
For effective separation of moisture from Steam Air and other gases, is the uniquely designed Baffle type of separator. In this separator the incoming fluid hit the baffle and the changing contour and resulting in expanding of volume, moisture gets deposited on the cool Baffle plates to be drained by the natural inclined inner profile of the separator, whereas the Steam / gas gets around the Baffle and out sans moisture, ensuring 95% efficiency, and longer life of equipment.

Condensate formed due to steam condensing in the pipeline may cause problems of varied nature in a steam circuit. It is also possible that the source of condensate could be the boiler supplying wet steam to plant. It is absolutely essential to remove this condensate from the line for supply of dry steam with minimum pressure drop to this equipment. The Moisture separator is designed to remove entrained water particles from the steam so that they can be drained away as condensate. The water particles settle on the cooler baffle plates and are drained away by the unique design of the body. This can also be used on compressed air lines. Moisture separators are well proven multi baffle designed to remove condensate with high level of efficiency and reliability. The multi baffle design will cause total removal of condensate from steam lines that are fed by boilers generating wetness as high as 20%. Typically contoured body design allows large flow areas to ensure low pressure drops.

  • Sizes: 40mm to 250mm
  • Pressure Range: PN63
  • Material Of Construction: Cast Carbon Steel


MATERIAL OF CONSTRUCTION:
ASTM A 216 Gr. WCB
END CONNECTIONS: Flanged End ANSI Class 150/300
INSTALLATION:- Preferably in Horizontal Position


AVAILABLE SIZES:

25,40,50 , 65,80, 100, 125, 150 and 200 NB.

OPTIONAL:
IBR/Non-IBR Flanged ANSI #150/#300 Drain Plug with TD Trap module

  • Installing moisture separators before equipment like flow meters, control valves can avoid damage to these costly equipment.
  • Use of moisture separators improves the overall health of the steam system and ensures high heat transfer rates and reliability of operation.