For Sales / Support Call / Email:

+91 20 26930908 / 26930960 / 61 Sales@steamequipments.com

Instrument Valves, Manifolds and Fittings

For INSTRUMENTATION Applications

• Twin Ferrule Tube Fittings

• Single Ferrule Tube Fittings

• Precision Pipe Fittings

• Tube Fittings with Integral Flange

• Ball Valves

• Needle Valves

• Guage / Root Valves

• 2/3/5 Way Manifold Valves

• Monoflange Valves

• Double Block & Bleed Valves

• Purge & Bleed Valves

• Toggel Valves

• Relief Valves

• Check Valves

• Micron In-Line Filters

For CNG Applications

• SS316 Twin Ferrule Tube Fittings

• Two Way Ball Valves

• Three Way Ball Valves

• 2/3 Way Manifold Valves

• Check Valves

• Relief Valves

• Hose Pipe

For HYDRAULIC Applications

• Tube Fittings to DIN 2353

• 37° Flare Fittings

• Quick Connect Couplings

• Swivel Joints

• Pipe Fittings

• Needle Valves

• Check Valves

Features & Benefits of Twin Ferrule Tube Fittings

Tube Fittings in material SS316/SS316L are Heat/Lot code traceable

• Guaranteed Right Material

• Improves efficiency, transparency and company integrity.

• Ensure safety capabilities with increased effectiveness.

Silver plating Extend the fittings life by preventing galling across a wide range of temperature.

• Dry lubrication ensure low torque during the assembly.

• No external lubrication required for assembly

• Excellent make-up and re-make life

Precision Machined to very close tolerances by monitoring critical dimensions, profile, surface finish, run out and sharp edges.

The leading edge of back ferrules are case hardened.

• Ensure strong Tube grip.

• Excellent Vibration Resistance.

• Leak-free Gas Seal.

• Reliable performance under high pressure and deep vacuum conditions.

Precision Machined to very close tolerances by monitoring critical dimensions, profile, surface finish, run out and sharp edges.

• Ensure leak free connections between Tube and Body

• Leak-free Gas seal.

• High performance and Safety under high pressure and deep vacuum conditions.

STEAMLOK® provides a slight taper in the base of the tube socket in the Fitting body. • Reduces the possibility of the tube sticking in Body during disassembly.
STEAMLOK® Twin Ferrule Tube Fittings offers deep vacuum capability with good quality tubing and will be leak tight at vacuum level of 10-9 torr. This test is conducted in-house with ASM 142 Helium Leak Detector (Alcatel) witnessed by TUV and DNV • Ensures maximum safety and reliability in deep vacuum applications.

STEAMLOK® Twin Ferrule Tube Fittings have been tested to tube burst i.e. 4 x permissible working pressure of the tube.

RESULT : No leakage, cracks or damage were detected in the Tube Fittings throughout the test.

• Ensures maximum safety and reliability in high pressure applications.