Multifunctional microprocessor analyzer to analyze the amount of silica in the water. Possibility to program two alarm set points (pre-alarm and alarm). The SEPL Silica Analyzer controls the quality of the water; this allows to avoid problems or damages caused by the presence of Silica when a programmed threshold is exceeded. With display of the measurement result. 4 programmable relay outputs: max value 1, max. value 2 (or minimum and maximum value), control for: cooler, wash valve, pump, error, indicator failure or remote signaling 1 output 0 (4) -20mA: result of the analysis (linear hardness) or operation.
Technical Parameter | |
Power Connection | 230V 50-60Hz (exactly: 85-264V, 47-63 Hz) or 24V AC/DC |
Measuring Range | 0.3 – 10 ppm |
Degree of protection: | IP-55 |
Outputs: | 4 Relay output 1 Analogue output (4-20 ma) SD card |
Inputs: | 2 Digital entries |
Temperature: | 5-40 Deg C |
Sample inlet/outlet connection: | flexible hose 6 mm outside diameter |
Weight | 10 Kg |
Dimension | 650 h X 300 w X 200 D |
pH Analyzer
Conductivity Analyzers
Dissolved Oxygen Analyzer
Chlorine Analyzers
TOC Analyzer
Silica Analyzer
Iron Analyzer
Oil in Water Analyzers
Hydrazine Analyzer
Hardness Analyzer
Chloride Analyzer
Phosphate Analyzer (Yellow Method)
Phosphate Analyzer (Blue Method)
Dissolved Zinc Analyzer
Sulphate Analyzer
Aluminum Analyzer
Cyanide Analyzer
Manganese Analyzer
Nitrite Analyzer
Sodium Analyzer
Alkalinity Analyzer
Ion Selective Analyzer
Sulfide Analyzer
COD-BOD-TSS Analyzers
Turbidity Analyzer
Optical DO Analyzer
Sequencer
