The PEM-9004 is a stack gas analyzer capbable of detecting and calculating up to ten (10) gas parameters, housed in a light-weight and robust case. An integral sample pump draws a sample through the included 316SS prove and gas treatment system built into the case. The analyzer utilizes microprocessor-based electronics with a back-lit LCD display and membrane panel to provide easy-to-view readings and navigation of functions.
Parameters
Measured
• Oxygen (O2)
• Carbon Monoxide (CO)(H2-compensated)
• Nitrogen Oxide (NO) – optional
• Sulfur Dioxide (SO2) – optional
• Flue gas temperature
• Ambient temperature
• Differential temperature
• Differential pressure
Calculated
• Carbon Dioxide (CO2)
• NOX
• CO – undiluted
• Boiler efficiency (Eta)
• Waste gas losses (qA)
• Excess air value (Lambda)
• IP-67 rated waterproof and chemical resistant case with vent valve
• Rechargeable battery with up to 40 hours continuous use (adapter included)
• Thermal printer with easy paper loading
• Large back-lit LCD display can show up to ten (10) readings at a time
• Easy to use menu options
• Electronic functions include hold, min/max, zoom, search and unit conversion
• Gas measurement units: %-vol, mg/m3, mg/kWh and mg/MJ
• Pressure measurement units: hPa, mbar, psi, mm, H2O, inches H2O, mmHg and inches Hg
• Selectable fuel type as a calculation factor
• Status bar provides device and system information
• Analyzer performs individual sensor self-diagnostics
• USB data interface
• Certified to EN 50379-2
• Stack monitoring gas application
Please note the patented “water stop” on the gas treatment system. In order to provide maximum protectio for the PEM-9004 measuring system, the following parts should be replaced when necessary:
• 09 Teflon Membrane
• 07 Infiltec fine filter
We recommend that you purchase a stock of these spares together with the instrument
