Model 4030

Total Hydrocarbon Analyzer

Description

Features

Specifications

Applications

Download

Description

The Model 4030 uses a field proven FID detector in a heated chamber. The chamber is heated to a high temperature to meet US EPA requirements for VOC emissions monitoring.

4000 Series Overview:
All 4000 series units employ the same basic architecture and electronics; however, each analyzer has additional features:

4020 Total Hydrocarbon Analyzer

Uses FID to measure total hydrocarbons in ppm in a sample gas stream

4030 Total Hydrocarbon Analyzer

Basic 4020 with sample system at a higher temperature for heated applications

Avoids condensation of the sample

4040 Methane / Non-Methane

Basic 4020, plus temperature-controlled sampling system with GC column to give accurate readings of both methane and non-methane hydrocarbons in a gas stream

4060 Benzene Analyzer

Same as 4040, but used to measure ppb levels of benzene instead of methane/non-methane

4080 Total Hydrocarbon Analyzer

Basic 4020 with sample system including stripper to measure total hydrocarbons in an aqueous sample

Features

Specifications

Applications

Download

Process Gas Analyzer

Oxygen Analyzers (Fixed)
Oxygen Analyzers (Portable)
Thermal Conductivity Analyzers
Hydrocarbon Analyzers
Infrared Analyzers
Nitrogen Analyzers
Nitrogen Oxides (NOx) & Ammonia Analyzers
Sulfur Analyzers

Ranges	0-10, 0-100, 0-1000 ppm THC. Other ranges available
Sensitivity	1% of FS
Resolution	0.1 ppm
Accuracy	± 2% of FS at constant temperature
Response Time	90% in less than 15 seconds, data updated every 5 minutes
Temperature	40° to 110° (4.44° to 43.33°C)
Fuel	UHP Hydrogen @ 30 PSI incoming pressure (standard)
Power	115 or 220 VAC, 50/60Hz, 600VA
Noise	Less than 0.5% of FS
Drift	2% FS per week
Linearity	1% FS through all ranges
Repeatability	1% FS through all ranges
Sample Chamber	212° to 248°F (100° to 120°C) per application
Flow Rate	1 Liter/minute (standard)
Outputs	0-1 VDC & 4-20 mADC, isolated current output
Warm-Up Time	Usable in approximately 4 hours Stable in approximately 8 hours
Carrier Gas	UHP Nitrogen @ 50 PSI incoming pressure
Enclosure	19″ rack mounted steel enclosure 19″W x 8.75″H x 15.5″D (48.3 x 22.2 x 39.4 cm)