The RS Series represents Teledyne’s benchmark online oxygen analyzer platform in its smallest yet most powerful form factor yet. 3000RS analyzers may be configured to work with micro-fuel cells or paramagnetic type sensors for analysis of trace or percent oxygen in a common form factor. A front panel dimension of approximately 4.3″W x 5.1″H x 16.8″D (109 x 130 x 427 mm) allows for mounting of up to four (4) RS-Series analyzers in a single 19-inch 3U bezel. Key parameters are displayed on the 3.5″ touchscreen color LCD. All gas connections and I/O are accessible at the rear panel.
Sensor Types
Micro-Fuel Cell
Excellent for ppm or percent detection, micro-fuel cells absorb and react with oxygen to generate a linear electrical signal proportional to O2 concentration. They are suitable for operation in a variety of backgrounds, insensitive to changes in flow and maintenance-free.
Teledyne’s patented Insta-Trace® sensors shield the sensing membrane from high ambient oxygen exposure during installation in a much faster initial recovery time to low ppm levels.
Unit Features
• Trace or percent oxygen analysis
• Touchscreen color LCD displays reading and key parameters
• Integral MEMS flow sensor
• 316 Stainless Steel tubing and fittings
• Auto-calibration and remote calibration ready (integral valves optional)
• EMI/RFI shielded
I/O Features
• Analog Outputs: 4-20 mADC (isolated) or 0-1 VDC
• 1 x System Fault Alarm, Form-C relay contact
• 2 x Concentration Alarms, Form-C relay contact
• Range ID: 4-20 mADC (isolated) or 0-1 VDC
• Range ID Contacts: 4 x Form-A (normally open)
• Profibus-DP or RS-232 communications
• Monitoring inert gas blanketing
• Air separation and liquefaction
• Chemical reaction monitoring
• Emissions monitoring
• Petrochemical process control
• Quality assurance
• Gas analysis certification
